Library Files
Library File Overview
This section provides information about the library files installed with Vericut ("library" folder in your Vericut installation). Library files are included in every installation, and include:
General Purpose Library Files
The following types of General Purpose Library Files are included:
Vericut default files — Default files opened by Vericut. The files are configured to perform a short simulation when Play is pressed. Two sets of files provide demonstrations for inch (vericut.*) and metric (vericutm.*) environments.
Vericut initialization files — Initialization files opened by Vericut via File tab > New Project. Two sets of files provide initialization for inch (init.) and metric (initm.) environments.
Library Control Files
Library Control Files are example NC machine controls intended to help you configure Vericut for simulating G-Code NC Programs that run on popular NC machining centers composite, tape laying machines or automatic drilling and fastener machines.
Library Machine Files
Library Machine Files are example NC machines intended to help you configure Vericut for simulating G-Code NC Programs that run on popular NC machining centers and composite tape laying machines.
General Purpose Library Files
The general purpose library files are listed below in alphabetical order.
| Library file name: |
Usage: |
Notes: |
| 2_axis_lathe_template_inch.vcproject 2_axis_lathe_template_metric.vcproject 3_axis_mill_template_inch.vcproject 3_axis_mill_template_metric.vcproject 4_axis_mill_b_table_template_inch.vcproject 4_axis_mill_b_table_template_metric.vcproject |
These files are sample template files to be used with the CAM Interfaces (ref. to the Converters and CAD/CAM Interfaces section, in the Vericut Help Library) |
These files are intended to be used as a starting point for creating your own template files. Change the machine and control files, and any settings as appropriate for your environment. |
| init.VcProject (in), |
|
|
| initm.VcProject (mm) |
Initialization files for Vericut- clears settings from the prior simulation, then configures Vericut with default settings for inch (init.) or metric (initm.) environments. |
Automatically loaded by Vericut when Configuration tab > Preferences is set to Start a new project and you select Cancel in the New Vericut Project window (Inch/Millimeter). |
| vericut.VcProject (in), |
|
|
| vericutm.VcProject (mm) |
Default files- files configured to perform a short simulation of a two setup project, using two different machines, when Play is pressed. |
Demonstrates how Vericut identifies many common NC program problems. |
Library Control Files
This section describes Control files available in the Vericut library ("library" folder in your Vericut installation). These files enable you to quickly configure Vericut to simulate how features of various NC controls affect the machining process. A Control file is loaded into Vericut via the Machine/Control tab > Open Control function, or by opening a Project file configured to use the control.
Available NC controls are listed below in alphabetical order, by control manufacturer and model.
📝 NOTE: Customized machines and controls can be found in the "samples" folder in your Vericut installation.
| Control Manufacturer |
Control Model |
Control File Name |
| Acramatic (by Cincinnati) |
|
|
|
850MC |
acr850mc.ctl |
|
950MC |
acr950mc.ctl |
|
2100 |
acr2100.ctl |
|
CNC PC |
acrcncpc.ctl |
| Allen-Bradley |
|
|
|
7320 |
ab_7320.ctl |
|
8200 |
ab_8200.ctl |
|
8600 |
ab_8600.ctl |
|
9260 |
ab_9260m.ctl |
| Boston Digital |
|
|
|
BDC 3200 (inch) |
bdc3200_in.ctl |
|
BDC 3200 (mm) |
bdc3200_mm.ctl |
| Charmilles |
|
|
|
200 Wire EDM |
chr200.ctl |
| Cincinnati - see "Acramatic" |
|
|
|
|
|
| Fadal |
|
|
|
CNC 88, Format 1 ("Fadal" mode) |
fad88a.ctl |
|
CNC 88, Format 2 ("Fanuc" mode) |
fad88.ctl |
| Fanuc |
|
|
|
Series 0 |
fan0m.ctl (mill) fan0t.ctl (turn) |
|
Series 3 |
fan3t.ctl (turn) fan3tt.ctl |
|
Series 5 |
fan5m.ctl (mill) |
|
Series 6 |
fan6m.ctl (mill) fan6t.ctl (turn) |
|
Series 9 |
fan9t.ctl (turn) |
|
Series 10 |
fan10m.ctl (mill) fan10t.ctl (turn) |
|
Series 11 |
fan11m.ctl (mill) fan11t.ctl (turn) |
|
Series 12 |
fan12m.ctl (mill) fan12t.ctl (turn) |
|
Series 15 |
fan15im.ctl (model "I" mill) fan15it.ctl (model "I" turn) fan15m.ctl (mill) fan15t.ctl, (turn) fan15t_t.ctl (turn-turret) fan15t_t_sync.ctl |
|
Series 16 |
fan16im.ctl (model "I" mill) fan16it.ctl (model "I" turn) fan16m.ctl (mill) fan16t.ctl, (turn) fan16w.ctl (wire EDM) fan16it_ mt2000.ctl Mori_seiki_mt2000sz_ fan16it.ctl |
|
Series 18 |
fan18im.ctl (model "I" mill) fan18it.ctl (model "I" turn) fan18m.ctl (mill) fan18t.ctl (turn) |
|
Series 21 |
fan21im.ctl (model "I" mill) fan21it.ctl (model "I" turn) fan21m.ctl (mill) fan21t.ctl (turn) |
|
Series 30 |
fan30im.ctl (model "I" mill) |
|
Series 31 |
fan31im.ctl (model "I" mill) |
|
Series 32 |
fan32im.ctl (model "I" mill) |
|
Series 150 |
fan150im.ctl (model "I" mill) fan150it.ctl (model "I" turn) fan150m.ctl (mill) fan150t.ctl (turn) |
|
Series 160 |
fan160im.ctl (model "I" mill) fan160it.ctl (model "I" turn) fan160m.ctl (mill) fan160t.ctl (turn) |
|
Series 180 |
fan180im.ctl (model "I" mill) fan180it.ctl (model "I" turn) fan180m.ctl (mill) fan180t.ctl (turn) |
|
Series 210 |
fan210im.ctl (model "I" mill) fan210it.ctl (model "I" turn) fan210m.ctl (mill) fan210t.ctl (turn) |
|
Series 300 |
fan300im.ctl (model "I" mill) |
|
Series 310 |
fan310im.ctl (model "I" mill) |
|
Series 320 |
fan320im.ctl (model "I" mill) |
|
Series 3000 |
fan3000c.ctl |
| GEMINI (by Kearney & Trecker) |
|
|
|
GEMINI-D |
gemini_d.ctl |
|
GEMINI-E |
gemini_e.ctl |
| General Electric (GE) |
|
|
|
1050MC CNC |
ge_1050mc.ctl |
|
2000MC CNC |
ge_2000mc.ctl |
| Generic (Fanuc-like) controls |
|
|
|
decimal |
generic.ctl (in) genericm.ctl (mm) |
|
leading zeros |
genlead.ctl (in) genleadm.ctl (mm) |
|
trailing zeros |
gentrail.ctl (in) gentrailm.ctl (mm) |
|
robot |
generic_robot.ctl |
| Giddings & Lewis (G&L) see "NumeriPath" |
|
|
|
|
|
| HAAS |
|
|
|
CNC |
hascnc.ctl |
|
MiniMill |
haas_minimill.ctl |
| Heidenhain |
|
|
|
Mill Plus |
heimplus.ctl |
|
TNC 407 |
hei407.ctl (conversational) hei407g.ctl (ISO) |
|
TNC 415b |
hei415b.ctl (conversational) hei415bg.ctl (ISO) |
|
TNC 415c |
hei415c.ctl (conversational) hei415cg.ctl (ISO) |
|
TNC 425 |
hei425.ctl (conversational) hei425g.ctl (ISO) |
|
TNC 426 |
hei426.ctl (conversational) hei426g.ctl (ISO) |
|
TNC 430 |
hei430.ctl (conversational) hei430g.ctl (ISO) |
|
TNC530 |
hei530.ctl |
| Huazhong |
|
|
|
|
huazhong_hnc.ctl |
| Kearney & Trecker |
|
|
|
|
kt_c.ctl |
| also see "GEMINI" |
|
|
| Lumonics |
|
|
|
Laserdyne System 94 |
laserdyne_94.ctl |
| Makino |
|
|
|
Professional Series 3 |
makpro3.ctl |
|
Professional Series 5 |
makpro5.ctl makino_a51_makpro5.ctl makpro5_mag3.ctl |
| Mazak |
|
|
|
Mazatrol Fusion 640 |
maz640m.ctl (mill) maz640mpro.ctl (mill) maz640mtpro.ctl maz640t.ctl (turn) maz640t_t.ctl maz640mpro_mazak_e650h_2000u.ctl maz640m_mazak_nexus410a.ctl maz640m_variaxis.ctl mazak_e650h_2000u_640mpro.ctl mazak_nexus_510c_matrix.ctl |
|
Mazatrol Matrix |
mazatrol_matrix.ctl mazatrol_matrix_integrex_e.ctl mazatrol_matrix_m.ctl mazatrol_matrix_t.ctl |
|
Mazatrol M-2 |
mazm2.ctl |
|
Mazatrol M-3 |
mazm3.ctl |
|
Mazatrol M-32 |
mazm32.ctl |
|
Mazatrol T-2 |
mazt2.ctl |
|
Mazatrol T-3 |
mazt3.ctl |
|
Mazatrol T-32 |
mazt32.ctl |
| NUM |
|
|
|
1020T |
num1020t.ctl |
|
1040T |
num1040t.ctl |
|
1060M |
num1060m.ctl |
|
1060T |
num1060t.ctl |
| NumeriPath (by G&L) |
|
|
|
800M |
nph800m.ctl |
|
8000L |
nph8000l.ctl |
|
8000M |
nph8000m.ctl |
| Olivetti |
|
|
|
MC8600 |
oli8600.ctl |
| OSP (by Okuma) |
|
|
|
OSP700L |
osp700l.ctl |
|
OSP5000L |
osp5000l.ctl |
|
OSP5000M |
osp5000m.ctl |
|
OSP7000L |
osp7000l.ctl osp7000l_t.ctl (turret) osp7000l_t_sync.ctl |
|
OSP7000M |
osp7000m.ctl |
|
|
osp_100l.ctl |
|
|
osp_p200m.ctl |
| PaR Systems |
|
|
|
Cimroc 5000 |
cimroc_5000.ctl |
| Phillips |
|
|
|
CNC 432 |
phi432.ctl |
|
CNC 532 |
phi532.ctl |
| Sinumerik (by Siemens) |
|
|
|
3T, 3TT |
sin3t.ctl, sin3tt.ctl |
|
810 |
sin810d.ctl (810D) |
|
840 |
sin840c.ctl (840C) sin840d.ctl (840D) index_sin840c.ctl (840C) |
|
880M |
sin880m.ctl (880M) |
|
FM-NC |
sinfmnc.ctl |
| Sundstrand |
|
|
|
Micro SWINC LM |
swilm.ctl |
|
Micro SWINC M200 |
swim200.ctl |
| Thermwood |
|
|
|
91000 Super Control |
thermwood_91000.ctl |
| Tosnuc (by Toshiba) |
|
|
|
888 |
tos888.ctl |
| Yasnac |
|
|
|
i80m |
yasi80m.ctl |
|
MX-3 |
yasmx3.ctl |
Library Machine Files
This section describes Machine files available in the Vericut library ("library" folder in your Vericut installation) and Vericut sample files ("samples" folder). These files enable you to quickly configure Vericut to simulate motions on various NC machines. Note that while library machines are generally considered ready to use, many of the sample machines have job-related data that may interfere when configuring for use with new NC programs. A Machine file is loaded into Vericut via the Machine/Control tab > Open Machine function, or by opening a Project/User file configured to use the machine.
Available NC machines are listed below in alphabetical order, by manufacturer and model. All machines reside in the "library" folder of your Vericut installation unless otherwise noted to be in "samples" or "showroom".
| Machine Manufacturer/ Machine Model |
Thumbnail |
Machine File Name |
|
|
|
| Aerostar |
|
|
| H2200 5-axis horizontal mill |
 |
aerostar_h2200.mch |
| BeAM |
|
|
| Magic 2.0 5-axis additive machine |
 |
beam_magic2.mch |
| Bostomatic |
|
|
| 5-axis vertical mill |
 |
samples – bostomatic_bdc3200.mch |
| Charmille |
|
|
| Robofil 200 4-axis wire EDM |
 |
charmilles_robofil_200.mch |
| Cincinnati |
|
|
| 3 spindle 5-axis gantry mill |
 |
samples - cincinnati_3_spindle_gantry_5ax.mch |
| 5-axis dual-tilting head vertical mill |
 |
samples- cincinnati_5_axis_acr950.mch |
| T30 5axis horizontal mill |
 |
cincinnati_t30_toolchanger.mch |
| Dixi |
|
|
| 350 TCA50S 5-axis horizontal mill |
 |
dix350m.mch |
| DPH-80 4-axis horizontal mill |
 |
dixi_dph80.mch |
| DMG |
|
|
| DMU 50V 5-axis vertical mill |
 |
dmg_dmu50v.mch |
| DMU 60 T 5-axis vertical mill |
 |
dmg_dmu60t.mch |
| DMU 125 P 5-axis vertical mill |
 |
dmg_dmu125p.mch |
| DMU 200 P 5-axis vertical mill |
 |
dmg_dmu200p.mch |
| Fadal |
|
|
| VMC 4020 4-axis vertical mill |
 |
fadal_vmc4020.mch |
| VMC 6030 3-axis vertical mill |
 |
fadal_vmc6030.mch |
| Fidia |
|
|
| 218 5-axis vertical mill |
 |
fidia_218.mch |
| Generic machines |
|
|
| 3-axis vertical mill |
 |
basic_3axes_vmill.mch |
| 3-axis vertical mill |
 |
basic_3axes_vmill_parametric.mch |
| 3-axis horizontal mill |
 |
basic_4axes_hmill_table_b.mch |
| 3-axis vertical mill |
Not 3-D |
generic_3ax_vmill.mch |
| 3-axis vertical mill |
 |
generic_vmill_3ax_3d.mch |
| 3-axis vertical mill -with robot gripper arm |
 |
samples - bars_robot.mch |
| 2-axis turret lathe |
 |
samples - polar_xy2xc_fanuc_3ht.mch |
| 3-axis vertical mill |
 |
maxcgt.mch |
| 4-axis vertical mill -table A |
Not 3-D |
generic_4ax_vmill_table_a.mch |
| 4-axis vertical mill -table B |
Not 3-D |
generic_4ax_vmill_table_b.mch |
| 5-axis horizontal mill head A, table B |
Not 3-D |
generic_5ax_hmill_head_a_table_b.mch |
| 5-axis horizontal mill table A on table B |
Not 3-D |
generic_5ax_hmill_table_a_table_b.mch |
| 5-axis horizontal mill table B on table A |
Not 3-D |
generic_5ax_hmill_table_b_table_a.mch |
| 5-axis vertical mill –head A on head B |
Not 3-D |
generic_5ax_vmill_head_a_head_b.mch |
| 5-axis vertical mill -table A, head B |
Not 3-D |
generic_5ax_vmill_head_a_head_b.mch |
| 9-axis cutter grinder |
 |
samples - 9_axis_grinder.mch |
| Giddings & Lewis (G&L) |
|
|
| 4-axis vertical turret lathe |
 |
gl_4axes_vtl.mch |
| G60 4-axis horizontal boring mill |
 |
gl_g60.mch |
| HAAS |
|
|
| MiniMill 3-axis vertical mill |
 |
haas_minimill.mch |
| VB-1 5-axis vertical mill |
 |
hass_vb1.mch |
| VF2 3-axis vertical mill |
 |
haas_vf2.mch |
| Hermle |
|
|
| C30 5-axis vertical mill |
 |
hermle_c30.mch |
| C800U 5-axis vertical mill |
 |
hermle_c800u.mch |
| Huron |
|
|
| KX 100 5-axis vertical mill |
 |
huron_kx100.mch |
| Index |
|
|
| G200 4-axis mill/turn |
 |
index_g200.mch |
| Kearney & Trecker (K&T) |
|
|
| HB4 4-axis horizontal mill |
 |
kt_hb4.mch |
| Kuraki |
|
|
| KBM11 5-axis horizontal boring mill |
 |
kurkbm11.mch |
| Makino |
|
|
| MC1010 5-axis horizontal mill |
 |
mak1010.mch |
| A51 4-axis horizontal mill |
 |
makino_a51.mch |
| A55 4-axis horizontal mill |
 |
makino_a55.mch |
| A66 5-axis horizontal mill |
 |
makino_a66.mch |
| A77 4-axis horizontal mill |
 |
makino_a77.mch |
| MAG3 5-axis horizontal mill |
 |
makino_mag3.mch |
| Marwin |
|
|
| Advanced Manufacturing Cell 5-axis horizontal mill |
 |
samples -marwin_advanced_manufacturing_cell.mch |
| Mazak |
|
|
| HTC 4000 5-axis horizontal mill |
 |
mazak_htc_4000.mch |
| Integrex E650H 4-axis horizontal mill/turn |
 |
mazak_integrex_e650h_II_2000u.mch |
| Nexus 410A 3-axis vertical mill |
 |
mazak_nexus410a.mch |
| Nexus 510C 3-axis vertical mill |
 |
mazak_nexus_510c.mch |
| QTN-250MY 3-axis mill/turn |
 |
mazak_qtn250my.mch |
| QTN-300 2-axis turret lathe |
 |
mazak_qtn300_650u.mch |
| Variaxis 500 5-axis vertical mill |
 |
mazak_variaxis500.mch |
| Variaxis 730 5-axis vertical mill |
 |
mazak_variaxis730.mch |
| Mecof |
|
|
| CS500A 5-axis horizontal mill |
 |
mecof_cs500a.mch |
| Mitsui Seiki |
|
|
| VX550-5X 5-axis vertical mill |
 |
mitsui_seiki_vertex_550_5x.mch |
| Mori Seiki |
|
|
| Partner M-400C1 5-axis vertical mill |
 |
ms_m400.mch |
| MT 2000 SZ multi-axis mill/turn |
 |
mori_seiki_mt2000sz_alpha1.mch |
| Mori Seiki SV500 3-axis vertical mill |
 |
mori_seiki_sv500.mch |
| Motch |
|
|
| 135-VNC vertical turning center |
 |
motch_135vnc.mch |
| Okuma |
|
|
| LB400 2-axis horizontal lathe |
 |
okuma_lb400.mch |
| MB-46V 3-axis vertical mill |
 |
okuma_mb46v_osp7000m.mch |
| Warner & Swasey |
|
|
| Titan 4-axis horizontal dual turret lathe |
 |
ws_titan.mch |