Logger Options¶

Location:

     Configuration tab > (Logger Options)

Use the Logger Options command button to specify what information that you want displayed in the logger, when you want to clear the Logger, or copy a Logger message to paste into another document.

When these features are set before the simulation, only the selected type of information will be written to the Logger. These features can also be used after the simulation to add or remove information from the Logger.

Error — When toggled "On" (check displayed), error messages will be written out to the Logger.

Warning — When toggled "On" (check displayed), warning messages will be written out to the Logger.

Info — When toggled "On" (check displayed), informational messages will be written out to the Logger.

Clear on Reset — When toggled "On" (check displayed), the contents of the Logger will be cleared whenever you do a Reset.

Clear — Selecting this feature will immediately clear the Logger. Using this feature only clears the Logger window, not the Vericut Log file.

Use Color — Selecting this feature causes the Logger window to use color to distinguish important text lines (for example: error lines may appear in red while normal lines may appear in black).

Copy Ctrl + C — Use this feature to copy the highlighted message(s) so that it can be pasted into another document.

Pick a number of individual messages for copying by holding the Ctrl key down while picking.

Pick a range of consecutive messages by selecting the first message in the range, and then hold the Shift key down while selecting the last message in the desired range. All of the messages between two messages that you selected will become highlighted.